Table of Contents
Advertisement
4.2
Working with the RTS SIP-ISDN
In the next chapters basic functions like establishing a connection, dropping a connec-
tion, accepting calls etc. are decribed in detail.
NOTICE
If you are not in the main menu please press the
From the main menu you reach the status window via the
4.2.1
Calling a partner
From the main menu just enter the phone number using the keys
the phone number is displayed automatically after entering the first cypher.
With the softkey
The connection is established after the entry of the phone number by pressing the tele-
phone receiver button
Under the softkey
book see CHAPTER 4.3.2, Page 23) or stored as Quick Dial Number see CHAPTER
4.3.2, Page 23).
4.2.2
The Status Display - Operation during a connection
After the telephone receiver button is pressed the partner is called and the status window
is displayed automatically.
TIP
The status window can always be reached by pressing the
During a stereo connection the number of the connected B channels is displayed to the
left of the level indication.
In the ISDN operating mode the window is split if two independent connections have
been established.
To switch between the two connections, please press the
selected channel is displayed inversely.
An outgoing call is signalised by
phone book entry is selected) is displayed in the first line.
When the connection is established the level indication for the incoming signal(
and for the outgoing signal(
With the use of the softkey
possible to directly switch to the phone book.
Delete
misentries can be corrected.
.
Opt.
(Options) the entered phone number can be saved in the phone
Dialling...
T
ransmit) is displayed.
Opt.
the displayed phone number can be stored and it is also
button first.
Ok
button.
0...9
. The input field for
OK
button.
Shift
#
key (
). The name of the
. The dialled number (or the name if a
R
eceive)
21
Advertisement
Table of Contents
