Working With Presets - RTS SIP-ISDN Hardware & Software Manual

24
4.3.3

Working with Presets

The RTS SIP-ISDN differentiates between
tings
.
System Settings are settings that do not change during normal operation like e.g. lan-
guage, date/time etc. These parameters cannot be saved as Preset since a configuration
is usually only required when the system is put into operation.
Operation Settings like e.g. the line interface, Ringing Tone, etc, need to be reconfigured
depending on the application. To easily recall recurring configurations you can store up
to 10 Presets in the system.
You reach the menu for the Presets by pressing the
key twice and by pressing the softkey
In the input field
acter, the corresponding entries of the Preset list are filtered out.
Alternatively, you can select a Preset from the list using the cursor keys
If you now press the
By the softkey
Select
softkey
Load
– : The stored Preset is loaded.
New
– : With the help of this function you can create a new Preset. All current Opera-
tion Settings are stored.
Save
– : The currently selected Preset is overwritten with the current Operation Set-
tings. For safety reasons a confirmation is required.
Delete Preset
–
mation is required.
NOTICE
If the configuration has changed, you are asked if you want to
you leave the Preset menu. Via the
nently in the system. This Preset is loaded automatically by the system after the unit
is connected to the power supply.
System Settings
Select
Presets
you can search for a certain Preset. As soon as you enter a char-
Ok
button, the selected Preset is loaded immediately.
Opt.
(Options) the following functions which you can select via the
are realised:
: The currently selected Preset is deleted. For safety reasons a confir-
Yes
softkey the configuration is stored perma-
Operation Set-
and
Menu
softkey once, the cursor
once as confirmation.
and
Save settings?
.
when