Volume Control; Standby - Motorola MW800 Series Manual

MW800 User's Guide
To remove a SIM Card from the slot:
• Pull the door latch and open the PC slot door.
• Push the button and pullout the card from the slot.
CAUTION: Inserting/removing SIM card when MW800 is running can corrupt SIM
card information. Please, insert/remove SIM card when MW800 is off.

Volume Control

Adjust the speaker volume with the Volume Up/Down buttons or with the Volume
Control program. The Volume Control program can be found on the Windows task
bar (speaker icon).
When using the Volume Control program note that the "Audio Out" outlet, on the
back panel of the CPU box, is referred to as "Headphones"
The display speakers are referred to as "Volume Control" For example, to assign the
volume control bar to the "Audio Out" outlet, on the back side of CPU box, perform
the following:
• Click on the speaker icon on the Windows task bar.
• Click on Options and select Properties.
• From the Options dialog box, check the Others option and select Headphones
from the drop menu.
NOTE: if your display unit includes a Bluetooth component, this application also
allows commutation of audio stream to the Bluetooth device.

Standby

To enter low-power state (standby), press the Standby button on the right display
side. In standby, the MW800 enters a power-saving mode, turns off the display
backlight and slows down the workstation speed. The workstation radios remain
powered on. To resume normal operation again touch the display panel or press any
display function key.
27