Basic Operations; Power On; Normal Operation; Extreme Temperature Conditions - Motorola MW800 Series Manual

MW800 User's Guide
Section 4:
This chapter provides basic information about the use of the MW800. It describes the
following operations:

• Power On

• Power Off
• Reset
• Access to PC and SIM cards
• Volume Control
• Standby
Power On
Ensure that the main power switch (MAIN SWITCH) on the rear CPU panel is in the
ON position.

Normal operation

There are a number of ways to start the MW800.
If the MW800 power is connected through the ignition and configured to be powered
only from the ignition switch, insert the car key into the ignition switch and rotate it
to ACC position.
If the MW800 power is connected directly from the battery (and not through the
ignition switch) and configured to be powered only from the power button, press the
CPU or display power button.
If the MW800 power is connected through the ignition and configured to be powered
from both the ignition switch and the power button, insert the car key into the
ignition switch and rotate it to ACC position or press the CPU or display power
button.
The MW800 will start up with its pre-installed operating system. This process takes
some time; please, wait for the end of operating system loading.

Extreme Temperature Conditions

Your device powers up only when the temperature is within the operating range.
When the ambient temperature drops below the low operational limit, an automatic
heater will kick in and maintain the working conditions for up to 16 hours or an
alternate pre-defined time.

Basic Operations

23