Tips; Touch Pad; Figure 12. Touchpad - Motorola MW800 Series Manual

MW800 User's Guide

Tips

• To change illumination level of the keyboard backlight, press the Fn key and
tap on the left or right arrow keys. The level of illumination will change
repeatedly from off to maximum in seven steps.
The keyboard incorporates a power saving feature that automatically turns off
•
the keyboard backlighting after a keyboard illumination time-out is expired.
Striking any key restores backlighting.
• To set duration of the keyboard illumination, press the Fn key and tap on the
arrow up or down keys. The up and down arrow keys will repeatedly
increase/decrease the period of illumination in seven steps of 10 minutes
(maximum of 70 minutes).

Touch pad

The touch pad uses the standard Microsoft mouse driver. The user can adjust the
pointer speed in the "Basics" dialog box of the "Mouse Properties" section of
"Control Panel" to his/her personal preference. Tapping with your finger simulates a
left mouse button "click". Two taps simulates a "double click". Use the buttons on
each side of the touch pad the same way you use standard mouse buttons.
To use the touch pad:
• Place your finger on the pad and move your finger in the direction you want
the cursor to move. The faster you move your finger, the faster the cursor
moves across the screen.
• Roll your finger from side to side to move the cursor short distances.
• Quickly tap your finger on the touch pad to click on an item.
• Tap your finger twice to double-click on an item.
Tap and hold to drag, draw, and highlight.
A
B
Figure 12. Keyboard Touchpad
19