Play From Usb; Play From Bluetooth Device - Taga Harmony HTR-1000CD Instruction Manual

Play from USB

Access a folder
• During playing, press the ALB+/- buttons on the remote control to select a folder.
• In stop mode, press the ALB+/- buttons on the remote control to select a folder
and press the l◄◄ / ►►l buttons on the unit or
control to select a file, and then press the ►l l button to start play.

Play from Bluetooth device

Note!
• Pairing needs only to be done once. The operational range is approximately 10
meters.
• Compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle can reduce the operational range.
1. Rotate the SOURCE knob on the unit or repeatedly press the
remote control to select the Bluetooth source.
2. Activate the Bluetooth function in your Bluetooth device (see the device user
manual).
3. Select "HTR-1000CD" on your device for pairing.
• For elder devices, you need to input "0000" as pairing password.
4. Start music play on your Bluetooth device, you can use this unit to control the
function to your Bluetooth device.
• To pause/resume play, press ►l l .
• To skip to a track, press l◄◄ / ►►l on the unit or
• To increase or decrease the volume, press VOL+/-.
5. Long pressing the PAIRING button for 2 seconds or more to clear Bluetooth pairing
history.
Note!
• If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-
enter pairing mode automatically.
• This unit supports A2DP (Advanced Audio Distribution Profile).
1. Insert the USB device's USB plug into the
rear of unit.
2. Rotate the SOURCE knob on the unit or directly press the
button on the remote control to select the USB source.
3. In stop mode, press the ►ll button to start playing.
During playing, press the ►ll button to temporarily stop the
playing, press the button again, it will continue to play.
4. Press the ■ button to stop playing.
Note! The player support the USB music file format of MP3,
WMA only.
/ buttons on the remote
/ AUX button on the
/ on the remote control.
socket on the
21