Taga Harmony HTR-1000CD Instruction Manual page 19

CD Operation
Programme Play
You can programme up to 20 tracks to play in any desired order. The player must be in
stop mode only with a CD inserted.
1. Insert a disc and press the ■ button when it starts playing.
2. Press the PROG button on the remote control, the LCD will display "001 p--01" and
"PROG".
3. Press the l◄◄ / ►►l buttons on the unit or 0-9,10+,
control to select the desired track number.
• To select track number 12, directly press 1, 2 buttons etc.
4. Press the PROG button on the remote control to confirm the track number to be
stored.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press the ►l l button to start programme play.
7. Press the ■ button once to stop the programme play. Press the ■ button twice to
clear programme.
Playing Repeatedly (CD disc)
• ONE and ALL Repeat Play can be set by pressing the MODE button.
◦ First press: To repeat the same track, the words "TRK" will blink and "REP" will
stay lit.
◦ Second press: To repeat playing all tracks on a disc, the words "TRK" and "REP
ALL" will stay lit.
◦ Third press: To play tracks randomly, the words "TRK" and "SHUF" will stay lit.
◦ Fourth press: To cancel the repeat playing, the word "TRK" will stay lit.
• Repeat A-B can be set by pressing the A-B button.
◦ First press: Select the start point, the words "REP A-" will stay lit.
◦ Second press: Select the end point, the words "REP A-B" will stay lit.
◦ Third press: To cancel repeat play, the word "REP A-B" will disappear.
Note! The section A and B can be set only within the same track.
Text Display During Playback (CD disc)
Repeatedly press the INFO button on the remote control to show the current track
number and single elapsed time or single remain time or total elapsed time or total
remain time.
/ buttons on the remote
19