Play From A Usb Flash Drive - Taga Harmony HTR-1000CD Instruction Manual

Play from a USB Flash Drive

This CD-Receiver can play music from some USB Flash Drives and supports MP3 and WMA
audio files.
1. Insert the USB Flash Drive into the USB port on the front panel.
2. Rotate the INPUT knob on the front panel or press the
select the USB input. The word [USB] will be displayed on the Display.
3. In the Stop mode, press the ►ll button to start playing.
During playing, press the ►ll button to temporarily pause the playing, press the button again to
continue playing.
4. Press the ■ button to stop playing.
Access a folder
• During playing, press the ALB+/- buttons to select a folder.
• In the Stop mode, press the ALB+/- buttons to select a folder and press the l◄◄ / ►►l
buttons on the front panel or ►l / l◄ buttons on the remote controller to select a file, and then
press the ►ll button to start playing.
Depending on the USB Flash Drive type, format and number or arrangements
of folders and files some music files may be played differently or may not be
recognized by the CD-Receiver.
We recommend to change the USB source to another one before removing
the USB Flash Drive.
button on the remote controller to
23