Eco-Power/Standby Features - Taga Harmony HTR-1000CD Instruction Manual

Connections
Connect the AUDIO IN jack on the front of the unit to the headphone jack on an exter-
nal device with an audio cable illustrated below.
• Rotate the SOURCE knob on the unit or directly press the AUDIO IN button on the
remote control to select the AUDIO IN source.
• Start to play the device. (See the device user manual)
Connecting the AC Power Cord

ECO-Power/Standby Features

Switching ON / OFF
When you first connect the unit to the AC power, the unit will be in standby mode.
• Press the standby button to switch the unit on. The word "HELLO" will show in the
display.
• A countdown of 10 seconds starts for preheating of the system. Then, the system will
switch to the last selected source.
• Press the standby button to switch the unit back to standby mode. The words "BYE
BYE" will show in the display.
12
Connect the AC~ socket on the main unit to
power plug to the wall outlet with an AC power
cord.
Caution!
Be sure to unplug the power plug from the wall
outlet when going out or when the unit is not in
use for an extended period of time.