Setting The Sleep Timer; Setting The Daily On Timer - Taga Harmony HTR-1000CD Instruction Manual

Setting the Sleep Timer

When the unit is turned on, repeatedly press the SLEEP button on the remote control
to select a set period of time (in minutes): 120, 90, 60, 45, 30, 15
When sleep timer is activated, the "SLEEP" is displayed.
To deactivate sleep timer
Press the SLEEP button repeatedly until [SLEEP OFF] is displayed.
When sleep timer is deactivated, the "SLEEP" is disappears.

Setting the Daily on Timer

This unit can be used as an alarm clock.
Caution! Make sure that you have set the clock correctly.
1. In standby mode, press and hold the TIMER button on the remote control, until [TIMER
SET] scrolls on the display and the source is displayed, e.g. DISC.
2. Rotate the - VOLUME + knob on the unit or press the VOL+, VOL-,
the remote control to select a source.
3. Press the TIMER button, the hour indicator will blink.
4. Repeat steps 2-3 to set the hour, minute and adjust volume.
Note!
• To exit timer setting mode without storing, press the ■ button.
• If no button is pressed in 90 seconds, the unit exits clock setting mode automatically.
• If disc/USB source is selected and the audio cannot be played, TUNER is activated
automatically.
To deactivate or re-activate an alarm timer
In standby mode, press the TIMER button to activate or deactivate timer.
• If timer is activated, " " is displayed.
• If timer is deactivated, " " is disappeared.
22
,
buttons on