Table of Contents
Advertisement
Play from a USB Flash Drive
Maximum supported USB flash drive capacity is 64GB.
Not all USB flash drives may be compatible and supported.
Playback Memory
The CD-Receiver stores the last position played on the USB Flash Drive and the play-
back will be continued from that point. To erase the playback memory stop the playback
using the
button or use another USB Flash Drive.
1. Insert a USB Flash Drive into the USB port.
2. Rotate the INPUT knob on the front panel or press the
controller to select the USB input. [USB] and then [READING] will be displayed.
3. If supported file formats are found, the playback will start automatically.
4. During playing, press the ►ll button to temporarily pause the playing, press the but-
ton again to continue playing.
5. Press the
button to stop playing.
Press the ►ll button to start playing.
USB Flash Drive Information
The following information is displayed:
• During playing - the file name, the current file number and its elapsed playing time.
Repeatedly press the INFO button to display the title, artist and album name (if they
are available).
• In the Stop mode - the total number of folders and files.
• In the Pause mode - the file elapsed time will blink.
Note! For some content the information may be not available or maybe not accurate.
To Skip or Search and Play
• Press the l◄◄ / ►►l buttons on the front panel or ►l / l◄ buttons on the remote
controller once or more to skip previous/forward one or more files on the disc or use
the number buttons. To select file number 12, directly press 1, 2 buttons etc.
• Press and hold the l◄◄ / ►►l buttons on the front panel or ►► / ◄◄ buttons on
the remote controller to search for the position that you intend to start playing.
Release to resume normal play.
Programme Play
You can programme up to 20 files to play in any desired order.
The USB Flash Drive must be inserted in the USB port.
1. Insert the USB Flash Drive and press the
2. Press the PROG button, [001 P--01] will be displayed.
3. Press the ALB+/- buttons to select a folder.
4. Press the l◄◄ / ►►l buttons on the front panel or 0-9, ►l / l◄ buttons on the
remote controller to select the desired file number.
• To select file number 12, directly press 1, 2 buttons etc.
5. Press the PROG button to confirm the file number to be stored.
6. Repeat steps 3-4 to select and store all desired files.
7. Press the ►ll button to start the programme play.
8. Press the
button once to stop the programme play.
29
Press the
button twice to clear the programme, [PRG CLR] will be displayed.
button on the remote
button when it starts playing.
Advertisement
Table of Contents
