Sound Quality - Taga Harmony HTR-1000CD Instruction Manual

Sound Quality

Adjusting the Volume
To increase or decrease the volume, rotate the - VOLUME + knob on the unit or press
the VOL+, VOL- buttons on the remote control.
Mute sound
During play, press the MUTE button to mute or unmute sound.
Adjusting the Super Bass
You can reinforce the bass sound to maintain rich, full bass at low volume.
Press the S-BASS button on the remote control to get the effect, the "DBB" will
displayed on the LCD. Press the S-BASS button again to cancel the effect.
Controlling the Loudness
This unit has a loudness function, which can automatically increase the bass sound
effect at low volume. It can also increase the bass sound effect at high volume, but it
will be relatively less when it is at high volume. Press the LOUDNESS button on the re-
mote control to obtain the loudness function, the " " will displayed on the LCD, press
again will disappear.
Adjusting the Bass
Rotate the - BASS + knob on the unit to adjust the intensity of the bass output sound.
Note! Bass adjusted, preset equalizer function is not available.
Adjusting the Treble
Rotate the - TREBLE + knob on the unit to adjust the intensity of the treble output
sound.
Note! Treble adjusted, preset equalizer function is not available.
Presetting Equalizer
You can adjust the sound reproduced simply by choosing from 5 preset equalizers.
During play, press the P-EQ button on the remote control repeatedly to select:
• [FLAT] (FLAT) - default
• [POP] (pop)
• [JAZZ] (jazz)
• [ROCK] (rock)
• [CLASSIC] (classic)
Changing the Front Panel Darkness
To dim or brighten the display, press the DIM button repeatedly on the remote control to
the desired brightness.
14