Taga Harmony HTR-1000CD Instruction Manual page 26

Troubleshooting
The audio quality is poor after connection with a Bluetooth
• The Bluetooth
obstacle between them.
Cannot connect with this unit.
• The device does not support the profiles required for this unit.
• The Bluetooth
device to find out how to enable the function.
• This unit is not in pairing mode.
• This unit is already connected with another Bluetooth
• Disconnect that device and then try again.
Timer does not work
• Set the clock correctly.
• Switch on the timer.
Clock/timer setting erased
• Power has been interrupted or the power cord has been disconnected.
• Reset the clock/timer.
We strongly advise to contact a professional installer or dealer in order to install
TAGA Harmony products.
We recommend using high quality TAGA Harmony cables and other installation
accessories.
26
®
reception is poor. Move the device closer to this unit or remove any
®
function of the device is not enabled. Refer to the user manual of the
®
- enabled device.
®
- enabled device.