Table of Contents
Advertisement
Specifications
CD Player
USB input
Connectivty wireless
Analog inputs
Power output
Vacuum Tubes
THD
Tuner
Presets
AC Power, Power Consumption
Dimensions (H x W x D)
Bluetooth
is a registered trademark of Bluetooth SIG, Inc.
®
We reserve the right to change the technical data and the design of the product without notice as a result of further development.
Additional information
Break-In
Your TAGA Harmony receiver sounds great immediately after it is taken out of the
carton but as all hybrid receivers, this receiver requires a "break-in" period to reach its
full sonic capabilities.
During the "break-in" period it is recommended to operate the receiver at moderate
volume levels.
The first level of the "break-in" is reached after approximately 10 hours of play.
The optimal level of the "break-in" is reached after approximately 40 to 60 hours of
play.
It is recommended to avoid one-time short periods of operation unless the receiver
reaches the first "break-in" level.
Vacuum Tube Replacement
The lifetime of vacuum tubes may vary and depends on their operation time and am-
bient temperature, playback volume levels and the number of on and off cycles.
Note! The warranty time for vacuum tubes is shorter than for other components of
this device - for more details check your warranty terms or contact a local dealer. The
replacement of the vacuum tubes should be performed only by the authorized TAGA
Harmony service facility.
Replacement vacuum tubes are not supplied with this product.
Main features & inputs
CD Audio, CD-R/RW (MP3, WMA audio files)
MP3, WMA audio files
®
Bluetooth
RCA stereo, 3.5mm stereo (front)
Amplifier section
2 x 75W RMS @ 4ohm, Class A/B
2 x 12AX7B
≤ 1%
Radio section
FM (87.5 - 108MHz), RDS
DAB+ (174.928 - 239.200 MHz)
20 FM / 30 DAB
Physical data
220-240V 50/60Hz, 70W
14 x 24.5 x 29.5 cm
23
Hide quick links:
Advertisement
Table of Contents
