Fm Radio Operation - Taga Harmony HTR-1000CD Instruction Manual

FM radio operation

Caution!
• Make sure that you have correctly connected and fully extended the DAB/FM
antenna.
• You can program a maximum of 20 FM radio stations.
Tuning in to a Station
1. Rotate the SOURCE knob on the unit or repeatedly press the
remote control to select the tuner source.
2. Select a station using one of the following methods.
• Auto Tuning
Press and hold the ►►l / l◄◄ buttons on the unit or ◄◄ / ►► buttons on the remote
control for one second or more, the frequency changes down or up automatically until
a station is found.
• Manual Tuning
Repeatedly press the ►►l / l◄◄ buttons on the unit or ◄◄ / ►► buttons on the
remote control to change the frequency until you find the station you want.
• Preset Tuning (Available only after the stations are preset)
Repeatedly press the 0-9,10+, PRESET
the desired preset number. Its band and frequency are displayed on the front panel.
◦ If the preset number is less than 10, press the number buttons 1-9.
◦ If the preset number is over 10, press 10+ button and press the one of the num-
ber buttons 0-9. (Note! If the preset number over 20, press 10+ button twice and
press the one of the number buttons 0-9.)
Program radio stations
• Automatically
Press and hold the PROG button on the remote control for 2 second or more to acti-
vate automatic program mode.
◦ [SCANING] is displayed.
◦ All available stations are programmed.
◦ The first programmed radio station is broadcast automatically.
• Manually
1. Tune to a radio station.
2. Press the PROG button on the remote control to activate program mode.
• The preset number will blink.
3. Press the PRESET
radio station.
Note! If you select a number higher than 20, then the preset number will be changed
to "1" automatically.
4. Press the PROG button on the remote control again to store the station.
5. Repeat above steps 1 to 4 for each station you want to store in memory with a preset
number.
Note! If the system is unplugged or if a power failure occurs, the preset stations will not
be erased.
/ buttons on the remote control to allocate a number to this
/ buttons on the remote control to select
button on the
17