Installing Cable Management Combs - Extreme Networks ExtremeRouting SLX 9850-4 Hardware Installation Manual

Installing cable management combs

9. Secure the door by tightening the thumbscrews on the door. The chassis door is now installed.
FIGURE 25 Chassis door installed
This completes the SLX-9850-4 NEBS kit installation for two -post rack kit mid-mount.

Installing cable management combs

You can install the cable management combs shipped with the chassis without service interruption for simple cable management.
If installing cable management combs, remove the chassis mount screws, and install the cable combs shown in the diagram below.
Reinstall the chassis mount screws when done.
54
ExtremeRouting SLX 9850-4 Hardware Installation Guide
9035474-02 Rev AA