Hardware Maintenance Schedule - Extreme Networks ExtremeRouting SLX 9850-4 Hardware Installation Manual

Hardware Maintenance Schedule

• Hardware maintenance schedule.............................................................................................................................................................135
Hardware maintenance schedule
ExtremeRouting SLX 9850 devices require minimal maintenance for hardware components. It is recommended that you perform the
following regular maintenance tasks:
• Clean the fiber-optic connectors on a fiber-optic transceiver port and the connected fiber cable each time you disconnect the
cable.
• Replace the air filters (included with NEBS kits) quarterly or as needed.
You can also replace the following hardware components, as needed:
• All modules (management, interface, and switch fabric modules).
• Fiber-optic transceivers.
• AC power supply modules.
• AC or DC power supply modules.
• Fan modules.
NOTE
The management, interface, and switch fabric modules are dedicated modules, which means that you must install them in
ExtremeRouting SLX 9850 devices only. If you install these modules in another Extreme Networks device, or you install a
module intended for another Extreme Networks device in an ExtremeRouting SLX 9850 device, the device and modules will
not function properly.
ExtremeRouting SLX 9850-4 Hardware Installation Guide
9035474-02 Rev AA 135