Husqvarna 535RX Operator's Manual page 8

To do a check of the vibration damping system
WARNING: An incorrectly wound cord or an
incorrect cutting attachment increases the
level of vibration. Refer to
for operation on page 4 .
The vibration damping system decreases vibration in the
handles to a minimum which makes the operation
easier.
1. Stop the engine.
2. Do a visual check for deformation and damage.
3. Make sure that the vibration damping units are
correctly attached.
To do a check of the quick-release mechanism
WARNING: Do not use a harness with a
defective quick-release mechanism.
The quick-release mechanism lets the operator remove
the product quickly from the harness if there is an
emergency.
1. Stop the engine.
8
2. Do a visual check for damage for example, cracks.
3. Release and attach the quick-release mechanism to
Safety instructions
To do a check of the muffler
The muffler keeps noise levels to a minimum and points
exhaust fumes away from the operator.
1. Stop the engine.
2. Do a visual check for damage and deformation.
3. Make sure that the muffler is correctly attached to
make sure that it operates correctly.
WARNING: Do not use a product with a
defective muffler.
WARNING: The muffler becomes very hot
during and after operation and also at idle
speed. Use protective gloves to prevent
burn injuries.
Note: The inner surfaces of the muffler contain
chemicals that can cause cancer. Be careful not to
touch these elements if the muffler is damaged.
the product.
1069 - 005 -