Ec Declaration Of Conformity - Husqvarna 535RX Operator's Manual

EC Declaration of Conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares that the brush cutters
Husqvarna 535RX, 535RXT and with serial numbers
dating from 2016 onwards (the year is clearly stated on
the rating plate, followed by the serial number), comply
with the requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of February 26, 2014 "relating to electromagnetic
compatibility" 2014/30/EU
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC. Conformity assessment
according to Annex V. For information relating to
noise emissions, see the Technical data chapter.
• of June 8, 2011 "on the restriction of the use of
certain hazardous substances in electrical and
electronic equipment" 2011/65/EU.
The following standards have been applied:
EN ISO 12100:2010, EN ISO 11806-1:2011, ISO
14982:1998, CISPR 12:2007,EN 50581:2012
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07
Uppsala, Sweden, has performed voluntary type
examination on behalf of Husqvarna AB. The certificates
are numbered: SEC/09/2135 - 535RXT, SEC/09/2134 -
535RX
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07
Uppsala, Sweden, has also verified agreement with
appendix V of the council's directive 2000/14/EG.
The certificate has the number: 01/164/044, 01/164/046
- 535RXT, 01/164/045, 01/164/047 - 535RX
Huskvarna, 2016-03-30
Per Gustafsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation)
30
EC Declaration of Conformity
1069 - 005 -