Supported Dhcp Fields; Setting The Ip Address: Phaserlink Printer Management Software - Tektronix Phaser 850 Setup Manual

Setting the Printer's IP Address

Supported DHCP fields

The printer recognizes the DHCP fields listed in the following table.
Field Description
gw Gateway address list
ha Hardware address
ht Hardware type (see
Assigned Numbers RFC)
ip IP address
lg Log host address(es)
sm Subnet mask
dn IP domain name
ds DNS server IP address
Setting the IP address: PhaserLink Printer
Management Software
After setting the printer's IP address by another method, you can perform the rest of the
TCP/IP configuration using PhaserLink Printer Management Software, if you have a World
Wide Web browser.
1. Connect to the printer via PhaserLink (see Accessing the printer from a browser on
page 33).
2.
On the left side of any PhaserLink page, click Settings.
3.
In the INTERFACES group, click TCP/IP.
4.
Enter your printer's settings and click Apply at the bottom of the page.
5.
The printer responds by displaying a dialog box that allows you to reset the printer.
The changes will not take effect until the printer is reset.
26
Values
List of IP addresses separated by spaces.
Hexadecimal; the ha tag must be preceded by the ht
tag.
Unsigned decimal, octal, or hexadecimal integer, or one
of the following symbolic names:
For UNIX Ethernet:
ethernet or ether for 10-Mbit Ethernet (DIX
encapsulation);
ieee802 for IEEE 802 Ethernet (SNAP encapsulation).
For UNIX Token Ring:
token ring
For OS/2 Ethernet or Token Ring:
ether
Single IP address.
List of IP addresses separated by spaces.
Single IP address.
Single domain name.
Printer recognizes up to two IP addresses, separated by
spaces.
Phaser 850 Color Printer