ABC Design Primo Instructions For Use Manual page 9

9. Adjusting the leg rest
Release the catches on both sides of the leg rest.
Move the leg rest to the required position and let go of the catches again to allow the leg rest to click into
the new position.
10. Lock and unlock setting on swivelling wheels
Push the lever downwards to lock the wheels.
Push the lever upwards for swivel position.
11. Fitting and removing the guard rail
To remove the guard rail, press the catch underneath the rail and pull it out of its fitting.
To fit the guard rail, push it into the fitting until it clicks into place.
NB: The guard rail must be securely engaged otherwise there is a serious risk that your baby can fall out!
12. Folding the pushchair
a. Before you can collapse the pushchair you have to fold the hood back.
To do this, push up the hood tensioning levers (1) on both sides and push the hood back (2).
b. Pull both catches up to release the folding mechanism.
c. Pull up the loop fittings located on the rear of the pushchair and fold the pushchair until the transportation
lock engages.
Caution: Ensure that all the catches are engaged before use.
EN - 06