15.0 Normal Operation
•
The panel is placed in its normal operating state by selecting "NORMAL OPERATION" from Page 1 of the
commissioning menu. Press 3 to select the function.
•
Once this is done the panel will perform a reset and then become fully active. The alphanumeric display may
prompt for entry of the time and date – enter the correct time and date as appropriate.
•
Refer to the User Manual for further information on the operation and functions available at User Levels 1
and 2.
Remember to lock the memory.
© 2002 Radionics
D8024/D10024A Operation and Installation Guide
Page 51
D8024/D10024A
Normal Operation
50616B