Assembling Your Cleaner - WERTHEIM Dog & Cat W2000 User Manual

Assembling Your Cleaner

The cleaner should be switched off and disconnected from the mains
power supply before you start to assemble.
1. Connect the hose connector to
the cleaner making sure it fits firmly.
2. Fit the handle into the telescopic
wand until it clicks into place.
3. Extend or reduce the length of the
telescopic wand by depressing
the button and moving the slider.
4. Push the wand into the selected
floor tool/accessory until it fits into
place. To remove, just separate.
7