Filter Maintenance
The HEPA filter should be replaced when clogged or at least every six
months. Do not use the cleaner without the filters fitted as it will cause
damage to the cleaner.
16
1.
To remove the motor filter, open the cleaner
cover and remove the bag.
2.
Remove the motor filter by holding the tab
and pull the filter out towards you.
3.
Separate the motor filter from its carrier
and wash it under warm tap water. Dry
thoroughly.
4.
Before cleaning or replacing the motor filter,
remove any dust from the surrounding area.
5.
The HEPA filter is located above the motor
filter. Remove the HEPA filter by lifting the
latch and sliding the filter towards you.
6.
Wash it under warm tap water. Dry
thoroughly.
7.
Replace the HEPA Filter and refit the motor
filter back into cleaner.