Appendix A - Profibus Parameters - ABB NPBA-12 Installation And Startup Manual

PROFIBUS
Parameter Name
Par. No.
918 NODE ADDRESS
947 FAULT NUMBER
963 CURRENT BAUD RATE
964 DEVICE IDENTIFICATION
965 PROFILE NUMBER
967 CONTROL WORD
968 STATUS WORD
971 STORE
NPBA-12 Installation and Start-up Guide
Appendix A – PROFIBUS Parameters
The table below shows the PROFIBUS Profile-specific Parameters. All
these values are of the "unsigned16" data type.
R/W Description
R Node address of the device
Allowable values: 2, ..., 126
R The last fault occurred in the drive
0h = No fault
1000h = Generic fault
R Detected baud rate
0 = 12 Mbit/s
1 = 6 Mbit/s
2 = 3 Mbit/s
3 = 1.5 Mbit/s
4 = 500 kbit/s
5 = 187.5 kbit/s
6 = 93.75 kbit/s
7 = 45.45 kbit/s
8 = 19.2 kbit/s
9 = 9.6 kbit/s
255 = Invalid baud rate
R Identification number of this device (6012h)
R Profile number of this device (0302h)
R 16-bit word for controlling the drive
R 16-bit word indicating drive status
R/W 0 = No action
1 = Save drive parameters to non-volatile memory
A-1