Submenu "Add Devices; Submenu "Delete Devices; Submenu "Delete List - Siemens Synco RMZ792 Basic Documentation

Use
Operating lines
Note
Use
Operating lines
Use
Operating line
26/52
Building Technologies
HVAC Products
6.3.4

Submenu "Add devices"

• Adding an individual device to the device list
• Adding devices from some other area to the device list
• Adding devices from some other line to the device list
• Updating the device list
Main menu > Commissioning > Device list > Add devices
Operating line
Area
Line
Device address
Start add on
Number of devices current
A search for operable Synco™ devices is made in the network according to the parame-
ters set. The devices found are added to the existing device list. Devices already con-
tained on the device list will not be added again. Settings Area, Line and Device address
confine the search for operable devices to the required part of the network, or even to
an individual device. This also reduces the search time to a reasonable level.
*
• When using setting
for the line, the search for devices runs through all the lines of
the required area
*
• When using setting
for the device address, the search is started for all devices
within the line
The function is started via operating line Start add on.
The number of devices found is displayed by the value of Number of devices current.
Same notes as in section 6.3.1 "Submenu "Create list"" apply.
6.3.5

Submenu "Delete devices"

• Reduction of the device list to the devices most important to the user
• Exclusion of individual devices from operation
Main menu > Commissioning > Device list > Delete devices
Operating line
Device address name 1
...
Device address name n
After a security check is made, the selected device will be removed from the device list.
The gap on the device list will be closed. Any datapoints of the deleted device will be
removed from the favorite pages.
6.3.6

Submenu "Delete list"

Deleting the entire device list.
Main menu > Commissioning > Device list > Delete list
Operating line
Delete list
After a security check is made, the entire device list inclusive of device names will be
deleted. In addition, all favorite pages will be deleted.
Bus operator unit RMZ792
6 "Commissioning" menu
Range
0...15
* / 0...15
* / 1...255
--- / Added
0...150
Range
Range
--- / Deleted
Factory setting
0
2
*
---
Factory setting
Factory setting
---
CE1P3113en
03.04.2006