User-Defined Text - Siemens Synco RMZ792 Basic Documentation

Building Technologies
HVAC Products
Error / error message
Caution!
Device not responding
Datapoint shows a value that does
not make sense (e.g. room tempera-
ture 655.3 °C)
Setting does not produce any effect
3.7

User-defined text

User-defined text from the devices is adopted, which means that the display on the bus
operator unit is identical with that on the local operator unit (RMZ790 / RMZ791). The
bus operator unit reads the user-defined text from the respective device. The RMZ792
displays the default text until the text from the device is received.
Bus operator unit RMZ792
3 Operation of devices
Cause / remedy
• Communication with target device is not
possible
• Is the device in operation?
• Is the device connected to the Konnex
bus?
• Has the device address been changed?
The device does not support information
describing what is visible; datapoint has no
meaning in the current configuration
The device does not support information
describing what is visible; datapoint has no
meaning in the current configuration
17/52
CE1P3113en
03.04.2006