GE AEE07KP Service Manual page 67

Service Manual
Steps
6
Remove evaporator
Unsolder each connection pipe (Note:
discharge the refrigerant completely
before
screws fixing evaporator and then
remove the evaporator.
7
Remove condenser
Unsolder each connection pipe (Note:
discharge the refrigerant completely
before unsoldering). Remove the
screws fixing condenser and then
remove the condenser.
Applicable for AEE18KP/AEE24KP
Applicable for AEE07KP/AEE09KP/
AEE12KP
Installation and Maintenance
unsoldering). Remove the
Procedure
screw
condenser
evaporator
screw
screw
condenser
screw
65