GE AEE07KP Service Manual page 32

AEE07KP,AEE09KP,AEE12KP,AEE18KP,AEE24KP
Remote control panel
Note:
Open the surface panel and operate manually.
POWER BUTTON
1
Under OFF mode, press the ON/OFF button to
turn on the unit. and stops when pressing this
button again.
SWING BUTTON
2
Activate the automatic air swing function.
FAN SPEED BUTTTON
3
Select the fan speed LOW,HIGH,TURBO,AUTO in
sequence.
TEMP/TIMER BUTTON
4
Press the to increase the set (operating)
temperature of the unit.and Press the
decrease the set (operating) temperature of the unit.
The temperature seting range is from 16~30℃(61~86℉).
Press the
and Press the
The time setting will be modified in steps of half an hour
at a time when less than 10 hours, and in steps of an
hour for more than 10 hours.
The time seting range is from 0.5~24 hours.
30
EN ER G Y
SAVER
O N / O FF
C O O L
M O D E
FAN
also to increase the selected time,
to decrease the selected time.
SWIN G TIM ER
TIMER/TEMP
TU R B O
FAN
H IG H
SP EED
LO W
SIGNAL RECEIVER
5
MODE BUTTON
6
Select the operation mode FAN,COOL,AUTO.
ENERGY SAVER BUTTON
7
Under energy saving mode, lamp of energy saving
mode is on, and the temperature setting range is
16~30℃
if remote control turbo speed by remote controller
NOTE:
Control panel is capable of displaying temperature
in degrees Fahrenheit or degrees Celsius,
To convert from one to the other, Press and hold
to
the Up
together for 3 seconds.
(61~86 ℉
).The buzzer will give out a beep
and Down buttons on Control panel
Service Manual
Technical Information