GE AEE07KP Service Manual page 25

Service Manual
Note: This wireless remote control is universal,and it could be used for many
other models. The buttons that are not relevant to this unit will not be
described below.
Remote Control
ENERGY
SAVER
ENERGY SAVER button
Under the COOL and DRY mode,
press
enter
this button again, the unit will exit
ENERGY SAVER mode.
LIGHT
LIGHT button
Press this button to turn ON or OFF
the light or display on the unit.
The light or display is defaulted on
after powering on
Technical Information
this button once, the unit will
ENERGY SAVER mode.Press
the unit.
+
+ button
Press this button to increase setting
temperature, hold for more than 2 seconds
to rapidly increase setting temperature.In
AUTO mode,setting temperature is not
adjustable.Setting temperature Range of
Celsius degree:16-30 ,Fahrenheit degree:
61-86 F.
o
-
- button
Press this button to decrease setting
temperature,hold for more than 2 seconds
to rapidly decrease setting temperature.
In AUTO mode,setting temperature is
not adjustable.
TIMER
ON
TIMER ON button
At unit off,press TIMER ON button,HOUR
ON will blink and display,
concealed in the TIMER ON setting.During
5 seconds blinking,the value can be
adjusted by pressing + or - button,every
press of this button,0.5hour will be increased
or decreased,by continuous pressing the +
or - button,2 seconds later,the value will be
changed quickly,0.5hour will be changed in
every 0.25second automatically by the
remote control.During blinking,press the
TIMER ON button to confirm the time.After
TIMER ON set up,with repressing the TIMER
ON button,the TIMER ON setting will be
canceled.After powered on,no timer is
defaulted, HOUR ON(OFF)will not display,
and only the clock is displayed.After the timer
reached the setting time,HOUR ON(OFF)
will conceal.Before setting the timer,please
adjust the clock to the current actual time.
TIMER
OFF
TIMER OFF button
At unit on,press TIMER OFF button to enter
into TIMER OFF setting.The method of setting
up is the same as TIMER ON.
℃
will be
23