Name And Function Of Wireless Remote Control - GE AEE07KP Service Manual

(2)Model:YS1FA (AED07KP,AED09KP)

Name and Function of Wireless Remote Control

Note: This wireless remote control is universal,and it could be used for many
other models. The buttons that are not relevant to this unit will not be
described below.
Remote Control
ON/OFF
ON/OFF button
Press this button to turn on the unit,
press it again to turn off the unit.
MODE
MODE button
Press this button, AUTO,COOL,
DRY,FAN, HEAt mode can be
selected circularly.
AUTO mode after powering on the
unit while the setting temperature
will not be displayed.The initial
setting temperature is 28
under HEAT mode,
under other modes.
22
Signal Transmitter
It is defaulted
(82 F)
℃
o
25
℃ (77 F)
o
AUTO
COOL
DRY
FAN
HEAT
(Only available for heating unit)
SLEEP
SLEEP button
Press SLEEP button to select sleep on
or sleep off. It is defaulted sleep off after
powering on.
sleep function is set on. The
is not available under FAN or AUTO mode.
FAN
FAN button
Press this button, AUTO,LOW,MED,HIGH
speed can be circularly selected. After
powering on the unit, auto fan speed
is defaulted.Under DRY mode, only
low fan speed can be set up.
AUTO
LOW
HIGH
CLOCK
CLOCK button
Press this button, the clock can be set up,
blinks and displays.Within 5
seconds, the value can be adjusted by
pressing + or - button,if consecutively
press this button for more than 2 seconds,
SWING button
When it is pressed,the louvers start to
rotate automatically and stop when
repressed.
Service Manual
will be displayed once
sleep function
MED
Technical Information