Description Of Each Control Operation; Cooling Mode; Dry Mode; Energy Saving Mode/Fan Mode - GE AEE07KP Service Manual

Service Manual

6.2 Description of Each Control Operation

(1)Models: AED07KP,AED09KP,AED12KP
1 Basic Functions

1.1 Cooling Mode

1.1.1 Working conditions and process for cooling
a) When T
indoor ambient
turned on and the fan will run at set fan speed.
b) When T
indoor ambient
c) When T
preset
1.1.2 In this mode, the temperature setting range is 61

1.2 Dry Mode

1.2.1 Working conditions
a) When T
indoor ambient
speed.
b) When Tpreset-4 (2 ) T
speed. Compressor will run for 6mins and stop for 4mins, and then it runs like that circularly.
c) When T
indoor ambient
1.2.2 In this mode, the temperature setting range is 61
1.3 Energy Saving Mode
1.3.1 Working conditions and process
a) When T
indoor ambient
b) When T
indoor ambient
running at set fan speed for 60s.
c) When T
preset
1.3.2 In this mode, the temperature setting range is 61
1.4 Fan Mode
1.4.1 In this mode, compressor tube will also stop running, while the fan will run at set fan speed.
1.4.2 The temperature setting range is 61 ~86 (16 ~30 ).
1.5 Auto Mode
1.5.1 When T
ambient
1.5.2 When T
preset
1.5.3 When 72 (22 )<T
first time, the unit will run at fan mode.
Technical Information
≥T +2 (1 ), the unit will start working in cooling mode. Meanwhile, compressor will be
preset
T -2 (1 ), compressor will stop running, while indoor fan will run at the set fan speed.
preset
-2 (1 )< T <Tpreset+2 (1 ), the unit will keep previous running status.
indoor ambient
and process for drying
> T +4 (2 ), the unit will run according to the cooling mode and the fan will run at low fan
preset
T
indoor ambient preset
< T -4 (2 ), compressor will stop running, while the fan will run at low fan speed.
preset
≥T +2 (1 ), compressor will be turned on and the fan will run at set fan speed.
preset
T -2 (1 ), compressor will stop running, and the indoor fan will also stop running after
preset
-2 (1 )< T < T
indoor ambient preset
≥79 (26 ), the unit is running according to cooling mode, T
=68 (20 ); if it's the cooling only controller, the unit will run according to fan mode, T
<79 (26 ), the unit will keep original running status; if the unit is energized for the
ambient
~86 (16 ~30 ).
+4 (2 ), the unit will run in dry mode and the fan will run at low fan
~86 (16 ~30 ).
+2 (1 ), the unit will keep previous running status.
~86 (16 ~30 ).
=77 (25 ).
preset
preset
=68 (20 ).
31