1. General information 1.1 Information about the instruction manual This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
1.3 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
2.Safety This section provides an overview of all important safety aspects. In addition every chapter provides precise safety advice for the prevention of dangers which are highlighted by the use of the above mentioned symbols. Furthermore, attention should be paid to all pictograms, markers and labels on the device, which must be kept in a permanent state of legibility.
o Children should not play with the device. o Cleaning and maintenance cannot be performed by children younger than 8 years old and must be done under supervision. o Children under the age of 8 years old must be kept away from the device and its power cord.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
① ⑩ Blender mixing cup Mixing bowl ② ⑪ Mixing cup lid Blade lock ③ ⑫ Mixing cup Power transfer switch ④ ⑬ Mixing cup base Motor housing ⑤ ⑭ Stainless steel blade Speed dial ⑮ Cutting disc for slicing with 2 slicing ⑥...
• Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires. • Do not move or tilt the device when in operation.
• The electrical circuit must be secured to a minimum of 16A. Only connect the device to a wall socket, do not use extension cords or power strips. • Ensure the device's plug is easily accessible in order to quickly turn the device off if necessary.
Page 13
• Prepare the desired food products. Wash the fruit and/or vegetables and cut into pieces that fit in the feed chute. • Use the speed dial to select the appropriate speed: • Level „1“ for low speed, • Level „2“ for high speed, •...
Page 14
To avoid overheating the device, adhere to the following guidelines for operating time and quantities of food products for selected implements. Stainless steel knife 30 seconds to 1 minute ≤ 200 g chocolate cheese ≤ 350 g meat spread ≤ 800 g vegetables, spices 100 - 150 g fruit...
Page 15
Using the mixing cup • The mixing cup is for mixing, making shakes or preparing puree from food products. • Place the motor housing on a stable, level surface. • Place the mixing cup on the motor housing and turn clockwise to secure it in place. •...
Page 16
• Additional ingredients can be added during mixing through the opening in the lid. Remove the mixing cup, add the desired ingredients and close the lid before turning the device on again. • Do not process large amounts of hard or frozen food. For best results, process such ingredients in small portions.
6. Cleaning and maintenance 6.1 Safety advice o Before beginning with repair or cleaning works make sure the device has been disconnected from power supply and has cooled down. o Do not use any acid agents and make sure no water ingresses the device. o To protect yourself from electric shock, never immerse the device, its cables and the plug in water or other liquids.
6.3 Safety instructions for maintenance o Inspect the power cable regularly for damage. Never use the device if the cable is damaged. If the power cable is damaged, have an authorised service center or qualified electrician replace it. o In case of damage or malfunction, please contact your stockist or our customer service centre.
NOTE! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax:...