Table of Contents
Advertisement
•
Prepare the desired food products. Wash the fruit and/or vegetables and cut into
pieces that fit in the feed chute.
•
Use the speed dial to select the appropriate speed:
•
Level „1" for low speed,
•
Level „2" for high speed,
•
Pulse
The position marked „O" is for turning the device off.
•
After selecting a speed, place the fruits and/or
vegetables in the feed chute and push down using
the pusher.
WARNING! Danger of injury!
Never use fingers or kitchen utensils to push fruits
and vegetables into the processor. Always use the
pusher!
CAUTION!
Never leave the device to operate without food
inside, even if it is properly assembled.
Operating time
ATTENTION!
The device can not be operated continuously for longer than 1 minute.
After this time the device should be given a 3-minute break.
A maximum of 5 cycles in a row can be performed, after which the device
should be left to cool to room temperature.
If the device overheats from being used for too long or from being overloaded,
the motor will automatically turn itself off and reactivate after cooling (around
15 minutes).
- 30 -
(for quick processing)
Advertisement
Table of Contents
