Installation And Connection - Bartscher FP 1000 Manual

•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not move or tilt the device when in operation.
•
Never leave the device unsupervised when in use.
•
Never operate the device with wet hands.
•
Never place your hands or kitchen utensils inside the device when in use.
•
Always ensure the device is properly assembled prior to use.
Safety mechanisms
Safety function
This function allows the device to be activated only when the mixing cup or bowl is
properly installed on the motor housing.
When the mixing cup or bowl is removed from the motor housing, the motor turns off.
Overheating prevention
This function is automatically activated when the device overheats from being used for
too long or from being overloaded. The device turns off automatically, then comes back
on after around 15 minutes.

5.2 Installation and connection

•
Unpack the device and remove all packing material.
•
Put the device in a safe place which can support its weight and maintain stability.
•
Use the device on a smooth, clean and dry surface the device's suction cups
can stick to.
•
Never use the device in wet or moist surroundings.
•
Do not place the device near open flames, electric ovens or other sources of heat.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!
- 28 -