D00619EN - v0
- Intermediate cover kit
2 TRANSPORT, STORAGE AND MAINTENANCE
2.1 Machine Delivery Conditions
is in charge of the initial delivery of the machine. Please make sure that all the parts and components arrive in good
condition: that they have not been tampered with, that there is no item missing from the list on the delivery note, that it did not
get wet or suffer from damage caused by the environment. If this is not the case, please log this in writing in the appropriate
delivery note and contact
2.2 Transport Conditions
For subsequent transportation, the machine must always travel conveniently packaged and protected from the elements.
2.3 Storage Conditions
If the machine is not going to be installed immediately, make sure it is stored in an area that meets the following criteria:
•
A safe place, protected from impact and out of reach from people who are not to use the product.
•
The machine needs to rest on a flat, smooth and resistant surface, maintaining the same distribution as in the transport
container or vehicle.
•
A location protected from corrosive environments, from the elements, damp, oils, fumes, etc.
3. TECHNICAL DATA
3.1 General Dimensions
CARACTERÍSTICAS MECÁNICAS
.
CARACTERÍSTICAS MECÁNICAS
CARACTERÍSTICAS MECÁNICAS
Lop = 675
Lop = 665
OTHER
- Cover to measure
Fig. 1.
6
SWING OPERATOR - INSTALLATION MANUAL
130