Installing Or Removing The Dimm On The Secure Router 4134 Mediation Server Module For Ocs - Avaya Secure Router 4134 Hardware Installation

Installing Avaya Secure Router 2330/4134 hardware components
5. Firmly grasp the DIMM by its edges and pull straight up to remove the DIMM from
6. Insert the replacement DIMM in the slot, pushing down firmly but gently to fully seat
Installing or removing the DIMM on the Secure Router 4134
Mediation Server Module for OCS
Caution:
This procedure does not apply to the Secure Router 2330.
Use the instructions in this section if you must install, remove, or replace a DIMM on the
Mediation Server Module for OCS. The DIMM on the Mediation Server Module is not hot
swappable.
Average time to replace a DIMM on the Mediation Server Module: 4 minutes.
Caution:
Do not open the Secure Router 4134 service access panel while the unit is powered.
80 Installation — Hardware Components
the slot.
the DIMM in the slot. The release latches close when the DIMM is properly
installed.
Comments? infodev@avaya.com
August 2013