A/V Settings Page - Atlona Omega AT-OME-MS42 User Manual

A/V Settings Page

The A/V Settings page is divided into three sections: Video, Audio, and HDCP. The Video section provides
controls for switching modes and input selection. The Audio section provides options to control the output audio
volume and de-embedding. The HDCP section controls whether or not HDCP content is allowed to pass.
Switching Mode
Click this drop-down list to manually select the switching mode. Refer to
information.
Modes
Mirrored
Matrix Mode
Matrix Mode w/ Static Route
Input Selection
Click this drop-down list to manually select the desired input.
Input
USBC
DisplayPort
HDMI3
HDMI4
AT-OME-MS42
Description
This is the default switching mode. Once video is detected on any of the
input ports, the output signal will be displayed on both the HDMI OUT and
HDBaseT OUT ports.
This mode allows the AT-OME-MS42 to independently switch between any
input to any output.
Use this mode when integrating the AT-OME-MS42 with a video conference
system.
Description
Sets USBC as the active input.
Sets DP IN as the active input.
Sets HDMI IN 4 as the active input.
Sets HDMI IN 4 as the active input.
Configuration and Management Interfaces
Switching Modes (page 17) for more
53