Matrix Mode
This mode allows the AT-OME-MS42 to independently switch between any input to any output. Auto-switching is
disabled in Matrix Mode.
1. Login to the web server. Refer to
2. Click A/V Settings in the menu bar.
3. Click the Switching Mode drop-down list and select Matrix Mode.
IMPORTANT: When the AT-OME-MS42 is set to Matrix Mode, both auto-switching and display
control will be disabled.
4. The following message will
appear near the top of the
screen. Click the OK button to
dismiss the message.
AT-OME-MS42
Introduction to the Web Server (page 51)
Device Operation
for more information.
18