A/V Settings Page - Atlona OMEGA AT-OME-ST31 Manuals

The A/V Settings page is divided into two sections: Video and Audio. The Video section allows the preferred
input timing to be selected as well as whether or not HDCP content is allowed to pass. The Audio section provides
options to control the output audio volume, muting, treble, and bass.
Input Selection
Click this drop-down list to select the desired input.
Input
A/V Mute
USBC
HDMI1
HDMI2
Auto Switch
Three controls are available under the Auto Switch feature.
• Auto Switch mode
Click this toggle to enable or disable auto-switching. When enabled, the AT-OME-ST31 will automatically switch
to the another port, if the signal is disrupted on the currently active input. The port to be switched to, is defined
in the Fallback Input drop-down list.
• Fallback Input
Click this drop-down list to select the fallback port. If the source is disconnected from the active port, then the
switcher can be configured to automatically switch to the desired port. Click the Auto Switch mode toggle to
enable or disable auto-switching.
• Fallback Time (Sec)
Click this drop-down list to select the time interval before the switcher attempts to search for the next port.
Range: 3 to 600.
AT-OME-ST31

A/V Settings page

Description
Blocks all inputs from receiving an input signal.
Sets INPUT 1 as the active input.
Sets INPUT 2 as the active input.
Sets INPUT 3 as the active input.
The Web GUI
30