Chapter 8: Adding And Removing Adapter Cards And Drives; Adding And Removing Adapter Cards - IBM Aptiva Handbook

6HWWLQJ PRGHP FDUG
FRQILJXUDWLRQV
If your system is equipped with a modem, follow these steps
to view or change I/O addresses and interrupt request
resources for a port on an installed modem card:
1.
Right click on the My Computer icon and select
Properties .
2.
In the System Properties window, click on the
tab.
Manager
3.
Click on
View devices by type
4.
Double-click on the modem list item to expand the list
underneath this item.
5.
Double-click on the Modem
expanded list.
6.
In the Modem
Properties
tab.
Resources
If you need help in using the Device Manager, press the
key to view the online help.
You must restart your computer before any Device Manager
changes can take effect.
8-2

Chapter 8: Adding and removing adapter cards and drives

Device
.
item appearing in the
window, click on the
F1
:RUNLQJ ZLWK WKH KDUGZDUH LQ WKH
V\VWHP XQLW
If you have not removed the cover from your system unit,
see "Opening the system unit" on page 7-4.
If you plan to add both an adapter card and a drive, install or
replace the drive before you install or replace the adapter
card. If you also plan to make hardware changes on the
system board, see Chapter 9 and finish your work with the
system board before continuing to work with the drives and
adapter cards.
To add or remove adapter cards or drives in the system unit,
complete the instructions in the following sections:
•
"Adding and removing adapter cards" on page 8-3
•
"Removing and adding drives" on page 8-5