Linking; Dmx Address; Dmx Mode; Dmx Addressing - ProLights Sunbar2000FC User Manual

3.4 LINKING

Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.

3.5 DMX ADDRESS

To enter the DMX mode, follow these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select the Address and press the ENTER key.
• Press the arrow keys to select the desired value (001-512).
• Press the ENTER key to confirm the setting.
• Press the MENU button repeatedly to exit the menu and save changes.

3.6 DMX MODE

The SUNBAR2000FC has more DMX channel configurations which can be accessed from the control panel.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select DMX Mode and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select the mode and press ENTER to confirm
your choice.
• Press the MENU button repeatedly to exit the menu and save changes.
The unit is equipped with 5-pole XLR connections.

3.7 DMX ADDRESSING

For operation via light control unit with DMX512 protocol, is sufficient connect the controller to SUN-
BAR2000FC. To able to operate the SUNBAR2000FC with a light controller, adjust the DMX start address
for the first a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of
the first DMX channel, adjust the start address 33 on the SUNBAR2000FC. The other functions of the light
effect panel are then automatically assigned to the following addresses.
SUNBAR2000FC
11