900w profile moving head, with 7000k white led source, 5 - 55 zoom (56 pages)
Summary of Contents for ProLights Sunbar2000FC
Page 1
SUNBAR2000FC STROBO LED BAR USER MANUAL MANUALE UTENTE EN - IT...
Page 2
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be reproduced in any form or by any means for any commercial use. In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteristics stated in this instruction manual at any time and without prior notice.
3. 18 Construction of the DMX termination 3. 19 DMX control 3. 20 Pixel layouts 4 Maintenance 4. 1 Maintenance and cleaning the unit 4. 2 Fuse replacement 4. 3 Trouble shooting Packing content • SUNBAR2000FC • Mount bracket • User manual...
SUNBAR2000FC WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. SAFETY General instruction • The products referred to in this manual conform to the European Community Directives and are there- fore marked with .
- 1 - INTRODUCTION 1.1 DESCRIPTION SUNBAR2000FC is an exceptionally powerful LED graphic strobe batten, featuring also as static blind- er and flood. SUNBAR2000FC offers a flexible control of beam coverage through an interchange- able lens system, passing from 100° wide to 30° beam increasing the light intensity up to 4 time. ...
Page 6
SUNBAR2000FC • Display: Black TFT touch display • Firmware Upgrade: Yes, via USB-DMX interface (UPBOX1) not included ELECTRONICS • Dimmer: Linear 0~100% electronic dimmer • Dimmer Curves:4 Different dimming curves available • Strobe/Shutter:1-30 Hz, electronic • Operating Temperature: -10° ~ +45°...
SUNBAR2000FC 1.3 OPERATING ELEMENTS AND CONNECTIONS 1. LED BAR 2. LOCKING KNOB mounting bracket. 3. MOUNTING BRACKET 4. CONTROL PANEL with TFT display and 4 button used to access the control panel functions and manage them. 5. AIR OPENING 6. DMX OUT (5-pole XLR): 1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C.
2.1 MOUNTING The SUNBAR2000FC may be set up on a solid and even surface. By means of the fixing facilities of the baseplate, the unit can also be mounted upside down to a cross arm. The base plate is shown in fig.3. For fixing, stable mounting clips are required.
Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to reset all motors to their home position. Shortly after that the SUNBAR2000FC is ready for operation. To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recommend- ed to connect the unit to a socket which can be switched on and off via light switch.
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX channel, adjust the start address 33 on the SUNBAR2000FC. The other functions of the light effect panel are then automatically assigned to the following addresses.
• Press the MENU button repeatedly to exit the menu and save changes. 3.12 FIXTURE For the SUNBAR2000FC you can access the following special functions: • Press the ENTER button to access the main menu. • Press the UP/DOWN button to scroll the menu, select the icon Set Up, then press the ENTER button to enter the next menu.
SUNBAR2000FC Dimmer 2 - Light intensity control is finer at high level and coarse at low levels. Dimmer 3 - Light intensity control is finer at low and high levels, and coarse to medium levels. - Fans Mode - Select this function to set the fans operation mode. Use the arrow buttons to select Auto Speed /High Speed.
SUNBAR2000FC to enter the next menu. • Press the UP/DOWN button to scroll through the menu, select Sequence and press ENTER to confirm your choice. • Press the UP/DOWN button to select the mode of operation: Show 1, Show 2, .., Show 23 •...
SUNBAR2000FC 3.17 CONNECTION OF THE DMX LINE DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped- ance and low capacity. The following diagram shows the connection mode: DMX - INPUT DMX - OUTPUT XLR plug XLR socket...
SUNBAR2000FC 3.19 DMX CONTROL BASIC STATIC BASIC PIXEL FUNCTION FUNCTION CHANNEL CHANNEL Value Value PIXEL 1 RED 0~100% 000 - 255 0~100% 000 - 255 GREEN PIXEL 1 GREEN 0~100% 000 - 255 0~100% 000 - 255 BLUE PIXEL 1 BLUE...
Page 20
SUNBAR2000FC PIXELS PIXELS BASIC RGBW STROBE MODE CHANNEL FUNCTION FUNCTION CHANNEL Value Value DIMMER Blackout 000 - 005 0~100% 000 - 255 Min to Max 006 - 255 GREEN FLASH DURATION 0~100% 000 - 255 15-990ms 000 - 255 BLUE...
Page 21
SUNBAR2000FC PIXELS PIXELS PIXELS PIXELS CHANNEL MODE FUNCTION MODE FUNCTION CHANNEL Value Value PIXEL 4 RED PIXEL 9 RED 0~100% 000 - 255 0~100% 000 - 255 PIXEL 4 GREEN PIXEL 9 GREEN 0~100% 000 - 255 0~100% 000 - 255...
Page 22
SUNBAR2000FC ADVANCED ADVANCED 1 ADVANCED ADVANCED 1 FUNCTION FUNCTION CHANNEL CHANNEL Value Value AUTO FX FLASH DIMMER No Function 000 - 010 Strobe dimmer 000 - 255 FX 1 011 - 015 FLASH STROBE FX 2 016 - 020 FX 3...
Page 23
SUNBAR2000FC ADVANCED ADVANCED 2 ADVANCED ADVANCED 2 FUNCTION CHANNEL FUNCTION CHANNEL Value Value FLASH DIMMER FX SPEED Strobe dimmer 000 - 255 Static indexing 000 - 050 FLASH STROBE From slow to fast 051 - 255 No flash/Closed 000 - 030...
Page 24
SUNBAR2000FC ADVANCED ADVANCED 3 ADVANCED ADVANCED 3 FUNCTION CHANNEL CHANNEL BAS FUNCTION FUNCTION Value Value FLASH DIMMER LAYER2 DIMMER LAYER1 DIMMER Strobe dimmer Strobe dimmer 000 - 255 Strobe dimmer 000 - 255 FLASH STROBE LAYER2 STROBE LAYER1 STROBE No flash/Closed...
Page 25
SUNBAR2000FC ADVANCED ADVANCED 3 FUNCTION CHANNEL Value LAYER1 SPEED Static indexing 000 - 050 From slow to fast 051 - 255 LAYER1 FX OFFSET Continuous start selection 000 - 200 Random distribution 201 - 255 LAYER2 FX No Function 000 - 010...
Page 26
SUNBAR2000FC ADVANCED ADVANCED 4 ADVANCED ADVANCED 4 CHANNEL FUNCTION CHANNEL BAS FUNCTION FUNCTION Value Value FLASH DIMMER LAYER2 DIMMER BG WHITE 000 - 255 Strobe dimmer Strobe dimmer 000 - 255 0~100% FLASH STROBE LAYER2 STROBE LAYER1 DIMMER No flash/Closed...
Page 27
SUNBAR2000FC ADVANCED ADVANCED 4 FUNCTION CHANNEL Value LAYER1 FX SPEED Static indexing 000 - 050 From slow to fast 051 - 255 LAYER2 FX OFFSET Continuous start selection 000 - 200 Random distribution 201 - 255 LAYER12 FX No Function...
SUNBAR2000FC - 4 - MAINTENANCE 4.1 MAINTENANCE AND CLEANING THE UNIT • Make sure the area below the installation place is free from unwanted persons during setup. • Switch off the unit, unplug the main cable and wait until the unit has cooled down.
SUNBAR2000FC 4.3 TROUBLESHOOTING Problems Possible causes Checks and remedies No mains supply Check the power supply voltage • • Dimmer fader set to 0 Increase the value of the dimmer channels • • All color faders set to 0 Increase the value of the color channels •...
Page 32
Music & Lights S.r.l. si riserva ogni diritto di elaborazione in qualsiasi forma delle presenti istruzioni per l’uso. La riproduzione - anche parziale - per propri scopi commerciali è vietata. Al fine di migliorare la qualità dei prodotti, la Music&Lights S.r.l. si riserva la facoltà di modificare, in qualunque momento e senza preavviso, le specifiche menzionate nel presente manuale di istruzioni.
Page 33
3. 18 Costruzione del terminatore DMX 3. 19 Canali DMX 3. 20 Pixel layouts 4 Manutenzione 4. 1 Manutenzione e pulizia del sistema ottico 4. 2 Sostituzione fusibile 4. 3 Risoluzione dei problemi Contenuto dell'imballo: • SUNBAR2000FC • Staffa di fissaggio • Manuale utente...
SUNBAR2000FC ATTENZIONE! Prima di effettuare qualsiasi operazione con l’unità, leggere con attenzione questo manuale e conservarlo accuratamente per riferimenti futuri. Contiene informazioni importanti riguardo l’installazione, l’uso e la manutenzione dell’unità. SICUREZZA Avvertenze generali • I prodotti a cui questo manuale si riferisce sono conformi alle Direttive della Comunità Europea e per- tanto recano la sigla .
SUNBAR2000FC è una barra stroboscopica grafica LED eccezionalmente potente, utilizzabile anche come blinder statico e flood. SUNBAR2000FC offre un controllo flessibile del fascio attraverso un sistema di lenti intercambiabili, passando da 100° a 30° di raggio aumentando l’intensità della luce fino a 4 volte.
Page 36
SUNBAR2000FC • Display: Black TFT touch display • Firmware Upgrade: Yes, via USB-DMX interface (UPBOX1) not included ELETTRONICA • Dimmer: Linear 0~100% electronic dimmer • Dimmer Curves:4 Different dimming curves available • Strobe/Shutter:1-30 Hz, electronic • Operating Temperature: -10° ~ +45°...
SUNBAR2000FC 1.3 ELEMENTI DI COMANDO E DI COLLEGAMENTO 1. BARRA LED 2. MANOPOLA DI FISSAGGIO per la staffa di montaggio. 3. STAFFA DI MONTAGGIO 4. PANNELLO DI CONTROLLO con display TFT e 4 pulsanti per l'accesso e gestione delle diverse funzioni.
- 2 - INSTALLAZIONE 2.1 MONTAGGIO Il SUNBAR2000FC può essere collocato su un piano solido. Inoltre, grazie ai fori di fissaggio, l’unità può es- sere montata anche a testa in giù, su una traversa (fig.3). Per il fissaggio occorrono dei supporti robusti per il montaggio.
(100-240V~/50-60Hz). La testa mobile e tutti i motori di comando si mettono in una precisa posizione di partenza. Poco dopo l’unità è pronta. Per spegnere il SUNBAR2000FC, staccare la spina dalla presa di rete. Per maggiore comodità è consigliabile collegare l’unità con una presa comandata da un interruttore.
• Premere il tasto MENU più volte per uscire dal menu e per salvare le modifiche apportate. 3.6 CONFIGURAZIONI MODALITA’ DMX SUNBAR2000FC dispone di più configurazioni dei canali DMX a cui si può accedere dal pannello di con- trollo. • Premere il tasto MENU per accedere al menu principale.
Premere il tasto MENU più volte per uscire dal menu e per salvare le modifiche apportate. 3.12 FIXTURE Per il SUNBAR2000FC è possibile accedere alle seguenti funzioni speciali: • Premere il tasto ENTER per accedere al menu principale. • Premere il tasto UP/DOWN per scorrere nel menu, selezionare Setup, quindi premere il tasto ENTER per accedere al menu successivo.
SUNBAR2000FC Off - Ll’aumento della luminosità è lineare. Dimmer 1 - Il controllo dell’intensità della luce è più fine a basso livello e grossolano a livelli alti. Dimmer 2 - Il controllo dell’intensità della luce è più fine ad alto livello e grossolano a livelli bassi.
SUNBAR2000FC Selezionare il programma desiderato sull’unità principale (descritto nella sezione 3.19). Utilizzare i connettori DMX di SUNBLAST2000FC e un cavo XLR per formare una catena di unità. 3.15 SEQUENCE L’unità può svolgere il suo programma Show autonomamente. Prima di inviare un programma automatico in esecuzione è...
SUNBAR2000FC 3.17 COLLEGAMENTI DELLA LINEA DMX La connessione DMX è realizzata con connettori standard XLR. Utilizzare cavi schermati, 2 poli ritorti, con impedenza 120Ω e bassa capacità. Per il collegamento fare riferimento allo schema di connessione riportato di seguito: DMX - INPUT...
SUNBAR2000FC 3.19 CANALI DMX BASIC STATIC BASIC PIXEL FUNCTION FUNCTION CHANNEL CHANNEL Value Value PIXEL 1 RED 0~100% 000 - 255 0~100% 000 - 255 GREEN PIXEL 1 GREEN 0~100% 000 - 255 0~100% 000 - 255 BLUE PIXEL 1 BLUE...
Page 50
SUNBAR2000FC PIXELS PIXELS BASIC RGBW STROBE CHANNEL FUNCTION MODE FUNCTION CHANNEL Value Value DIMMER Blackout 000 - 005 0~100% 000 - 255 Min to Max 006 - 255 GREEN FLASH DURATION 0~100% 000 - 255 15-990ms 000 - 255 BLUE...
Page 51
SUNBAR2000FC PIXELS PIXELS PIXELS PIXELS CHANNEL FUNCTION FUNCTION MODE MODE CHANNEL Value Value PIXEL 4 RED PIXEL 9 RED 0~100% 000 - 255 0~100% 000 - 255 PIXEL 4 GREEN PIXEL 9 GREEN 0~100% 000 - 255 0~100% 000 - 255...
Page 52
SUNBAR2000FC ADVANCED ADVANCED 1 ADVANCED ADVANCED 1 FUNCTION FUNCTION CHANNEL CHANNEL Value Value AUTO FX FLASH DIMMER No Function 000 - 010 Strobe dimmer 000 - 255 FX 1 011 - 015 FLASH STROBE FX 2 016 - 020 FX 3...
Page 53
SUNBAR2000FC ADVANCED ADVANCED 2 ADVANCED ADVANCED 2 FUNCTION CHANNEL FUNCTION CHANNEL Value Value FLASH DIMMER FX SPEED Strobe dimmer 000 - 255 Static indexing 000 - 050 FLASH STROBE From slow to fast 051 - 255 No flash/Closed 000 - 030...
Page 54
SUNBAR2000FC ADVANCED ADVANCED 3 ADVANCED ADVANCED 3 FUNCTION CHANNEL CHANNEL BAS FUNCTION FUNCTION Value Value FLASH DIMMER LAYER2 DIMMER LAYER1 DIMMER Strobe dimmer Strobe dimmer 000 - 255 Strobe dimmer 000 - 255 FLASH STROBE LAYER2 STROBE LAYER1 STROBE No flash/Closed...
Page 55
SUNBAR2000FC ADVANCED ADVANCED 3 FUNCTION CHANNEL Value LAYER1 SPEED Static indexing 000 - 050 From slow to fast 051 - 255 LAYER1 FX OFFSET Continuous start selection 000 - 200 Random distribution 201 - 255 LAYER2 FX No Function 000 - 010...
Page 56
SUNBAR2000FC ADVANCED ADVANCED 4 ADVANCED ADVANCED 4 CHANNEL FUNCTION CHANNEL BAS FUNCTION FUNCTION Value Value FLASH DIMMER LAYER2 DIMMER BG WHITE 000 - 255 Strobe dimmer Strobe dimmer 000 - 255 0~100% FLASH STROBE LAYER2 STROBE LAYER1 DIMMER No flash/Closed...
Page 57
SUNBAR2000FC ADVANCED ADVANCED 4 FUNCTION CHANNEL Value LAYER1 FX SPEED Static indexing 000 - 050 From slow to fast 051 - 255 LAYER2 FX OFFSET Continuous start selection 000 - 200 Random distribution 201 - 255 LAYER12 FX No Function...
Page 59
SUNBAR2000FC - 4 - MANUTENZIONE 4.1 MANUTENZIONE E PULIZIA DEL SISTEMA OTTICO • Durante gli interventi, assicurarsi che l’area sotto il luogo di installazione sia libera da personale non qualificato. • Spegnere l’unità, scollegare il cavo di alimentazione ed aspettare finché l’unità non si sia raffreddata.
Page 60
SUNBAR2000FC 4.3 RISOLUZIONE DEI PROBLEMI Anomalie Possibili cause Controlli e rimedi Mancanza di alimentazione di rete Verificare la presenza della tensione alimentazione • • Dimmer impostato a 0 Incrementare i valori del canale dimmer • • Tutti i colori impostati a 0...
Need help?
Do you have a question about the Sunbar2000FC and is the answer not in the manual?
Questions and answers