Carf-Models CL-41 Tutor Manual page 30

of any service requirements before removing
the cover and cutting the openings. Ensure
you remove all sharp edges from around
the cut-outs.
The front of the duct is left completely open
and draws air from the whole fuselage. A FOD
guard must be used!
The standard set of leads supplied by JetCat is
ample for the type of installation shown. There
are various openings cut through the formers
allowing you to choose a route for the wiring.
Ensure you fix the cables every 150mm.
Photo 27: Turbine bolted in position.
Composite ARF Tutor T-114 manual – techsupport@composite-arf.com
28