Table of Contents
Advertisement
Nose Anti Stall Strips
The two flat strip, anti stall blades are installed
on the nose centred on the moulded line that
runs from the nose light area back to the cooling
vents on either side. (Photo 22)
Each blade features four tabs to securely locate
each to the nose sides. Mark the tab position and
cut four slots. Ensure the slots line up perfectly
to maintain the anti stall blade line.
Some work will be required to ensure a perfect
fit on the fuselage side. Each side is slightly
different, so mark each side and maintain that
relationship through fitting.
Photo 22: Anti-stall strips.
Composite ARF Tutor T-114 manual – techsupport@composite-arf.com
Tip: when the four tab slots are cut push the
blades in fully and using a marker pen held
against the fuselage side draw a line on each
blade to follow while filing for a perfect fit.
Fix with epoxy glue. Some white and blue trim
sheet is provided to allow the bird scheme to
be matched.
24
Advertisement
Table of Contents
