Introduction; Checking The Shipment - Keysight E4990A Installation Manual

Keysight E4990A Impedance Analyzer
Installation Guide
1

Introduction

This chapter provides information about how to set up Keysight E4990A

Checking the Shipment

After you receive the analyzer, carry out checks during unpacking according to
the following procedure.
When unpacking the analyzer, if the exterior of the analyzer (such as the
cover, front/rear panel, LCD screen, power switch, and port connectors)
appear to be damaged during transport, do not turn on the power switch.
Otherwise, you may get an electric shock.
Step 1. Check that the packing box or shock- absorbing material used to package the
analyzer has not been damaged.
If the packing box or shock-absorbing material has been damaged, leave
the packing box and shock-absorbing material as is until other inspection
items are checked as follows.
Step 2. Check the packaged items supplied with the analyzer for any damage or
defects.
Step 3. By referring to the furnished contents list, check that all packaged items
supplied with the analyzer have been received as per the specified options.
Step 4. After checking, if one of the following applies, contact your nearest Keysight
Technologies sales and service office.
1. The packing box or shock- absorbing material used to package the analyzer
2. A packaged item supplied with the analyzer has mechanical damage or
has been damaged or the shock- absorbing material has traces where
extreme force has been applied.
defects.
11