PeakTech 1210 Operation Manual page 153

Trigger
Trigger Sensitivity (Edge Trigger)
Trigger
Trigger Level Range
Trigger Level Accuracy (Typical):
It is applicable to the signal with
the rising and falling time ≥ 20ns
Set Level to 50% (Typical)
Trigger Sensitivity (Video trigger,
typical)
Signal System and Line/Field
Frequency (Video Trigger Type)
Trigger
Measurement
Cursor Measurement
Automatic Measurement
Probe
Bandwidth
Attenuation Ratio
Compensation Range
Input Resistance
Input Electric Capacity
Input Voltage
DC Coupling
Channel 1 and Channel 2: 1div (DC ～
Bandwidth )
EXT
100mV(DC ～ 60 MHz (P 1210), 100 MHz (P 1215)
EXT/5
500mV(DC ～ 60 MHz (P 1210); 100 MHz (P 1215)
AC Coupling It is the same as the DC coupling in case of 50Hz or
more.
Coupling DC, AC, LF Rjc, HR Rjc
Internal ± 6 divisions from the screen center.
EXT ± 600mV
EXT/5 ±
Inside ± 0.3 div
EXT ± ( 40mV + 6% of Set Value)
EXT/5 ± (200mV +6% of Set Value)
Operation under the condition of input signal frequency ≥ 50Hz.
Internal Peak-to-peak value of 2 divisions
EXT
EXT/5
Supporting the NTSC, PAL and SECAM broadcast system of any field
frequency of line frequency.
Alternate CH1
Trigger
CH2
Voltage difference (△V) and time difference (△T) between cursors.
Peak-to-Peak Value, Average , RMS , Frequency, Periode, Vmax,
Vmin, -Width, +Duty, -Duty, Delay A-B
1X Position
DC: up to 4 MHz
1: 1
10pf ～ 35pf
1M ± 2%
85pf- 115pf
150 V DC
152
3V
400mV
2V
, Delay A-B
10X Position
DC: up to full bandwidth
10: 1
10M ± 2%
14.5pf- 17.5pf
300 V DC
Full
Edge, Video