Open Scan (Os) Mode - Uniden UH9080 Owner's Manual

Operation
3. Press [MENU] one more time.
4. Press /
5. Press and hold the [MENU] to save and exit from the Menu Mode.
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE

Open Scan (OS) Mode

frequencies have been added to the OS SCAN Memory for convenience. To add/remove
channels from OS SCAN Memory, refer to p.23.
Allows continuous scanning of all selected channels. If an active channel
is found, scanning will stop on that channel. If the received signal ceases, the unit will
wait 3 seconds for the signal to return, otherwise scanning resumes.
After transmission in scan mode, the unit will wait 20 seconds for the signal to return,
otherwise scanning resumes.
To select OS Scan Mode:
1. Press [MENU] six times.
2. Press /
3. Press and hold [MENU] to save and exit from the Menu mode.
UNIDEN UH9060/UH9080
to select the desired Subcode (CTCSS or DCS).
to change the setting to OS.
25
UHF CB Transceiver