X Remote Punch In/Out; Y Tdif-1 (Digital I/O); Z Time Code (In, Out); A Word Sync (In, Out, Thru) - Tascam DA-78HR Owner's Manual

X REMOTE PUNCH IN/OUT

Use this to connect an optional RC-30P foot-
switch to control punch operations.

Y TDIF-1 (DIGITAL I/O)

This connector carries the digital signals to and from
the DA-78HR in TEAC Digital Interface Format
(TDIF-1).

Z TIME CODE (IN, OUT)

These RCA connectors are used to carry SMPTE/
EBU timecode to and from the DA-78HR. For details
of using the DA-78HR with timecode synchroniza-
tion, see 9, "Operations related to timecode".

a WORD SYNC (IN, OUT, THRU)

These BNC connectors are used to carry the word
clock between the DA-78HR and other types of digi-
tal audio equipment. The THRU
terminated (i.e. there is no need for a terminator
when this is unconnected).

b DIGITAL IN, OUT (COAXIAL)

These RCA connectors provide an SPDIF stereo dig-
ital audio signal containing the submix signal (
or accept an SPDIF signal (
"Sub-mixer" and 5.3.1, "Digital input selection").
connector is auto-
OUT )
IN
) for recording (see 7.4,
2 - Front and rear panel features

c ANALOG INPUTS (unbalanced)

These eight RCA connectors accept unbalanced ana-
log audio inputs at –10 dBV.

d ANALOG INPUTS (BALANCED)

This connector carries 8 balanced inputs at a nominal
+4 dBu level. This allows convenient and reliable
single-cable connection to the GROUP outputs of a
suitably-equipped console such as the TASCAM M-
1600 series.

e ANALOG OUTPUTS (unbalanced)

These eight RCA connectors output unbalanced ana-
log audio signals at a –10 dBV level.

f ANALOG OUTPUTS (BALANCED)

This connector carries 8 balanced outputs at a nomi-
nal +4 dBu level. This allows convenient and reliable
single-cable connection to the tape return inputs of a
suitably-equipped console such as the TASCAM M-
1600 series.
g ~ IN
Use the provided AC power cord to connect the DA-
78HR to the AC power supply through this
connector.
16
TASCAM DA-78HR