System Menu; Audio1 Menu - Tascam DA-78HR Owner's Manual

4 - Menu interface, etc.
the current position of the knob and the cur-
rent parameter value do not match.
3 When the
SHUTTLE/DATA
blinks rapidly, the current position of the knob
matches the current parameter value. Turning
the knob from this position will now allow the
parameter value to be changed.
4 Turn off the "data entry" mode using the
SHIFT SHUTTLE/DATA
and
Until the match described above has been made, the
value of the parameter cannot be changed using the
knob.
Dis play shows
as the current value
Indicator
flashes s lowly
Current position
corres ponds to
Display now shows
as the current value
Indicator
flashes fast as
soon as dial is
turned past
position
Note that because of the precision of the knob, the
value may sometimes appear to "jump".
Fine-tuning of values should be done with the
keys.

4.4 SYSTEM menu

The following parameters are
used to control and provide information regarding the
overall operation of the unit:
V alues
Display
(*=default)
* through
(ID selection)
ID when the unit is connected in a chain of DTRS units
*,
(time mode)
Reference timing source
*,
(clock mode)
(individual)
Clock source for a slave unit.
23
TASCAM DA-78HR
indicator knob
key combination.
This position
corresponds
to
This position
corresponds
to
Current position
corresponds to
and
Described in
8.2.2, "Setting
machine ID"
9.1, "ABS and
timecode"
8.6, "Individual
clock mode"
V alues
Display
(*=default)
, through
(peak hold)
seconds (default
is ),
uous)
Meter peak hold time
*,
(release time)
(slow),
(medium)
Meter release time
*
(save)
Saves the current settings to the tape
*
(load)
Loads settings from tape

4.5 AUDIO1 menu

The following parameters
are used to control the audio operation of the unit
using the first audio menu:
V alues
Display
(*=default)
(TDIF)*,
(SPDIF)
Selects digital audio source (for tracks 7 and 8 only)
(input patch)
analog),
(all digital),
individual track s
set to
log),
or (track)
Track input source can be either analog, digital or a recorded
track
*, ,
(TDIF)
Input digital word length
*,
(dither)
angular),
angular)
Dither noise shape
Described in
7.8.1, "P eak hold
time"
(contin-
7.8.2, "Meter ballis-
tics"
7.14, " Saving set-
tings to tape "
7.15, " Restoring
settings from tape"
Described in
5.3.1, "Digital input
selection "
* (all 5.3, "Input selec-
tion"
(ana-
(digital)
5.4.2, "Selecting
input word length"
(rect- 7.11.1, "Selecting
(tri- dither settings"